A washing machine that's suddenly noisy or shaking violently during spin is one of the most alarming faults to experience, but it's also one of the more predictable to diagnose. New, sudden loud noise is almost always mechanical - worn drum bearings, a failed shock absorber or suspension spring, or occasionally an object trapped between the drum and outer tub. Getting the diagnosis right the first time matters here specifically because continuing to run a machine with a mechanical fault risks turning a moderate repair into a full tub or motor rebuild.
Produces a deep rumbling or grinding sound that gets progressively louder over several weeks, worst during high-speed spin.
Causes banging noise and can make the machine visibly shake or "walk" across the floor during spin.
One of the most common and entirely free-to-fix causes - if all four feet aren't touching the floor evenly, the machine will vibrate excessively even with no internal fault at all.
Coins, underwire, or small hardware that slipped past the drum holes can cause a rattling or knocking noise, particularly noticeable during spin.
On a newly installed machine, forgetting to remove the rear transit bolts is a very common and easily overlooked cause of extreme vibration.
Call a technician when: the noise is a grinding or grating sound specifically during spin (the classic bearing-failure signature), or the machine is genuinely shaking/moving rather than just vibrating slightly - both mean continuing to run it risks turning a moderate repair into an expensive one.
Suspension spring and shock absorber wear after 4-5 years is the most common noise complaint on these brands' front loaders, rather than the motor itself.
Tight manufacturing tolerances mean even a slightly unlevel installation produces noticeably more noise on these models than on other brands, so levelling is worth checking first.
Carbon brush and motor-mount wear is a more common noise source here than bearing failure, particularly on twin-tub semi-automatic units.
Sudden, new noise - especially during spin - is almost always mechanical: worn drum bearings, a failed shock absorber, or a suspension spring. It rarely resolves on its own and tends to worsen with continued use.
Not for long. A grinding noise during spin specifically is the classic sign of bearing failure, and continuing to run the machine in that state risks the bearing damaging the outer tub, turning a moderate repair into a much larger one.
It can be, both to the machine (accelerating wear on hoses and connections) and to your flooring or nearby cabinetry. It's usually a levelling issue or a failed shock absorber/suspension spring, both fixable in a single visit.
The most common cause is that the rear transit/shipping bolts weren't removed during installation - these are designed to protect the drum suspension in transit and must come out before first use.
We offer noise & vibration repair in 190+ neighbourhoods across all three emirates — from Downtown Dubai and Dubai Marina to Al Nahda Sharjah and Ajman Downtown — with the same upfront pricing, genuine parts and 90-day warranty everywhere we go.
Same-day service, upfront pricing, 90-day warranty.
